Good question, and the 4" x 8" measurement is referring to the opening of the Undampered RV Floor Register; the total length of the register is approximately 5-1/2" x 9-1/2". The 4" x 8" undampered register does come in your choice of three different colors:
- Black: Undampered RV Floor Register # 37202-29165
- White: Undampered RV Floor Register # 37202-28945
- Brown: Undampered RV Floor Register # 37202-28955
I have added links below to a couple video reviews for you to check out... view full answer...
We do have exactly what you need, with floor registers that have interior dimensions (the opening) of 8 inches long and 4 inches wide; you even have your choice of color:
- Black: Dampered RV Floor Register # 37202-29155
- White: Dampered RV Floor Register # 37202-28965
- Brown: Dampered RV Floor Register # 37202-28975 view full answer...
I reached out to Valterra for the dimensions of the Valterra RV Toilet Floor Gasket with Hold Down Bolts # Q23653VP, and they sent me the accompanying dimensional diagram.
It has an outer diameter of 4-3/4", an inner diameter of 3-1/4" and has a total height of just over 3/4". It is designed to be used with Replacement RV Toilet Floor Flange - 3" MPT # T05-0782 or Replacement RV Toilet Floor Flange - 3" FPT # T05-0784. view full answer...
The MORryde RV Cargo Sliding Tray # MR28FR is a total of 6-5/8" tall and sits approximately 1.57" off of the compartment floor. I have included a dimensional diagram of the MORryde RV Cargo Sliding Tray # MR28FR that you can take a look at. view full answer...
The JR Products Dampered RV Floor Register part # 37202-28915 measures 11-7/8” long x 4-1/4" wide. The minimum cutout size needed is 9-7/8” long x 2-1/4" wide. The 10" long x 2" wide dimensions are used as a standard for floor registers but each brand can vary slightly. view full answer...
Yes, the WeatherTech All-Weather Front Floor Mats # WTW51TN will fit your Four Wynns RV. These mats are a fit for a 2010 Ford E-450, which is the chassis your Four Wynns RV was built on. I also highly recommend using the Cleaner and Protector Kit for WeatherTech Floor Mats # WT8LTC36K if you use your RV with any regularity to keep your mats clean and prolong their life. You can take a look at a video review I've linked for you on this product as well. view full answer...
The MORryde RV Fridge Tray # MR69UR would add 2 inches to the height of your portable fridge as the tray floor is 2 inches above the floor. view full answer...
The JR Products Dampered RV Floor Register # 37202-28915 has a 1-1/4" depth and the mounting holes are 11" on center just like you referenced. view full answer...
The threaded part of Replacement RV Toilet Floor Flange - 3" MPT Item # T05-0782 is 13/16 inches tall. I have included a couple of pictures show several measurements of this part for you. view full answer...
The checker squares on the RV Vinyl Flooring - Checkerboard - 12' Long x 8'4" Wide Strip - Black/White Item # TS29FR are 6" x 6".
Please note the links to product review and installation videos. view full answer...
While I can't tell you what that would be as this would vary from RV to RV, however I can tell you that the MORryde RV Cargo Sliding Tray - 72" x 20" - 2 Way Slide # MR74FR has an overall height of 6-5/8".
So you'd have to measure the interior height, and then subtract that figure from 6-5/8" to determine how much height you'll lose. view full answer...
The distance from the floor that the MORryde Sliding Tray for RV Cargo Compartment # MR39FR is mounted on to the carpeted surface of the tray is approximately 1.75" view full answer...
The 2 x 10 inch dimension represents the hole in the floor that the # 37202-28905 register is meant to fit into. So, the outer dimension of the flange that inserts into the rough opening in the floor will be just shy of 10 x 2 inches. view full answer...
Better Bath RV Shower Pan - Right Hand Drain - 36" x 24" - White # LC210375 will sit 1/8 inch off the ground at the drain. I went to our warehouse to measure it for you.
It will be a total of 5 inches deep at the top lip and the front lip will sit about 2 inches off the floor. The main edge of the pan where you enter will be 4 inches.
I've attached a photo with more measurements to assist. view full answer...
No, the thickness of the:
-RV Vinyl Flooring # TS56FR is 0.65mm thick not .65", so it's about as thick as a credit card.
We do also offer a couple other sizes of lengths if you're interested:
-For 12', we have # TS29FR,
&
-For 24', we have # TS56FR. view full answer...
The 2" x 10" measurement that is mentioned for the JR Products Undampered RV Floor Register # 37202-28935 has to do with the typical size of the opening that it fits into. Since the flange itself measures 3-3/4" x 11-1/2" it will work perfectly for your application. The mounting holes are 11" apart on center. view full answer...